- Home /
- Fire /
- Fire - Smoke Detection /
- Base /
- Brooks Mains Powered 230V Wireless
Products
- Audio
- Cable
- Discontinued Items
- Fire
- Intercom
-
Intrusion - Access - Automation
- Access Control
- Alarms
- Automation - HDMI
- Beams
- Biometrics
- Contact Reed Switch
- Egress
- Electronic Locks
- Evacuation
- Glass Break Detection
- Infra Red
- Inovonics Wireless Devices
- Input Output Devices
- M1 Automation & Security
- PCB's
- PIR's
- PIR's - Radio
- Power
- Power Adapters
- PSTN
- Radar
- Strobe
- Temperature
- Viberation Detection
- Z Wave
- Medical
- Network
- Power
- Storage
- System
- Video & Surveillance
Brooks Mains Powered 230V Wireless
Details
-
Unit of Measure:Each
Description
The EIB168RF RadioLINK Base transmits a Radio Frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF alarm signal from another EIB168RF Base, the attached smoke or heat alarm will sound. It therefore eliminates the need to run long interconnect wires between all the smoke alarms on different floors and in different rooms. It is designed for use with the EasiFit range of Mains Powered Smoke/Heat Alarms. The RadioLINK Base itself, is also mains powered and has rechargeable Lithium cells for back-up in the event of mains failure. The RadioLINK Base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINK Base rather than to its normal mounting plate. As many as 30 units can be interconnected in this way. **Up to 20 alarms can be interconnected.