Same Day Dispatch

Search

Shopping Cart

Cart: 0
Total: $0.00

Ness M1 XEP Ethernet Port Expander

Stock Code:
101-215

Downloads

Details

  • Unit of Measure:
    Each

Description

The Ness-M1XEP is an Ethernet module with an RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security-sensitive environments.

A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be set up with a static IP address.

  • Web server with embedded Java applet "M1 Virtual Keypad"
  • Secure connection with password protection and HTTPS
  • Flash Memory for Firmware Updating
  • Event notification via E-Mail (SMTP)
  • Internet Monitoring and Reporting Capability
  • URL Updating using Dynamic DNS
  • TCP/IP stack supporting the following protocols: TCP,UDP,DHCP,SSL 3.0/TLS 1.0, HTTP, SMTP
  • FIPS 128 bit encryption
  • Integrated 802.3 compliant 10/100 Mbit network interface
  • RS232, DB9M 9-pin serial port connection
  • Connects to the M1 RS-232 Serial port (Port 0)
  • RJ45 8-pin Network Jack
  • 2.1mm barrel type power connector (center positive)
  • LED Indicators for Power, Link, and Data
  • Operating Voltage: 12 Volts D.C.
  • Current Draw: approx. 300 mA
  • Housing Dimensions: 4.25" x 6.375" x 2.125"
  • Circuit Board Dimensions: 2.25" x 3.95"

Related Products